The broad spectrum formulation of Rely+On™ Virkon™ is unique. No other disinfectant has the same powerful composition or extensive portfolio of performance and safety testing data. It combines application flexibility with broad spectrum efficacy, on hard surfaces, and in the face of organic challenge. These qualities make Rely+On™ Virkon™ the disinfectant of choice for use in medical facilities, pathology and biosafety containment laboratories, treatment salons and residential homes.
Superior Operator Safety Profile
Rely+On™ Virkon™ has fewer handling and use constraints than many other disinfectant products and is not classified as harmful or a sensitiser in both powdered form and in-use dilutions, in accordance with EU legislation on the classification and labelling of chemical preparations.
Rely+On™ Virkon™ oxygen-based chemistry contains simple organic salts and organic acids and the active ingredient decomposes by a variety of routes within the environment, in soil and water, breaking down to form the naturally occurring substances, potassium salts and oxygen. The major organic components are classified as readily biodegradable according to OECD and EU tests.
Rely+On™ Virkon™ is not considered persistent in the environment, according to the standard European process for the classification and labelling of chemical preparations. Independent studies have shown that diluted Rely+On™ Virkon™ should not, when used as directed, pose any threat to sewage treatment facilities.
- Routine disinfection of hard surfaces, furniture, floors, walls and doors in hospital wards, clinics and laboratories
- Broad spectrum disinfection and decontamination of hard surfaces in critical clinical facilities, such as operating theatres, intensive care units and accident and emergency departments
- Body fluid spillage clear-up and decontamination
Pathology and Biosafety Containment Laboratories
- Routine cleaning and disinfection of hard surfaces and equipment*, such as benches, floors, walls and doors, cabinets, centrifuges and pipette discard jars.
- Routine cleaning and disinfection of hard surfaces such as floors, walls, doors and door handles.
- Routine disinfection of hard surfaces, equipment*, furniture, floors, walls, doors and door handles in treatment and communal areas, corridors and bathrooms.**
- Routine disinfection of surfaces, including floors, walkways, walls, doors and door handles.
Mode of Action
Rely+On™ Virkon™ oxidizes key structures and compounds, such as proteins, leading to widespread, irreversible damage and subsequent deactivation/ destruction of the microorganism.
There is no evidence to suggest that bacterial disease-causing organisms develop resistance towards Rely+On™ Virkon™ as opposed to some other disinfectant types.
|Proven Broad Spectrum Efficacy|
Independently proven highly effective against:
using a wide variety of contact times, temperatures and organic challenge levels.
Hard Surface & Equipment Cleaning & Disinfection
The level of disease-causing organisms present after general cleaning can remain high enough to offer a serious disease challenge to patients and staff. Using a disinfectant proven to be effective against viruses, bacteria and fungi, such as Rely+On™ Virkon™, is essential.
Easy to Prepare
Readily soluble in warm tap water, Rely+On™ Virkon™ dissolves into a pink solution, which activates within 5 minutes and remains stable for up to 5 days, as a 1:100 solution. Consult your local representative for advice on stability for any alternate strength solutions.
Unused or inactive solutions may be disposed of via the sink (leading to waste water treatment facilities and in accordance with local regulations).
|Hard Surface Disinfection||1:100 (10 grams of Rely+On™ Virkon™ to every litre of water)||Apply disinfectant solution using either a trigger spray bottle, a suitable knapsack type sprayer, cloth, sponge or floor mop. Allow to dry, before any re-use of treated areas. For disinfection of hard surfaces, apply the solution at a rate of 200ml/m2|
|Equipment Disinfection (not for medical devices)||1:100 (10 grams of Rely+On™ Virkon™ to every litre of water)||Suitable equipment can either be submerged and washed in disinfectant solution or sprayed and then wiped clean with a cloth or sponge. Rinse disinfected equipment with clean water after 10 minutes when materials compatibility is of concern. Refer to the product Instruction for Use leaflet (IFU) for further specific information.|
* Not for use for the disinfection of medical devices.
** Users should always check for compatibility with any sensitive materials before use. Do not use on any soft metals such as brass or copper.
Not recommended for use on soft furnishings, textiles or carpets.
The specified uses and registered claims may vary from country to country.